Case Construction Equipment, a brand of CNH Industrial, manufactures rugged rough-terrain forklifts designed for demanding outdoor environments. Unlike standard warehouse forklifts, Case's all-terrain forklifts are built on the same heavy-duty chassis as their loaders and backhoes, making them ideal for construction sites, farms, landscape supply yards, and any operation dealing with heavy, palletized materials on uneven ground.
The H Series – Case’s Current All‑Terrain Forklift Lineup
Case's all‑terrain forklift offering is centered around the H Series, which includes two primary models: the 586H and the 588H.
Model Lift Capacity Engine Power Typical Applications
586H 6,000 lbs (2,722 kg) 74 hp (55 kW) Pipes, pallets, general construction materials
588H 8,000 lbs (3,628 kg) 74 hp (55 kW) Heavier loads, demanding industrial sites
Both models are powered by a 74-horsepower FPT diesel engine.
Key Features and Technologies
Performance and Speed
Roading Speed: Up to 24 mph (38.6 km/h), allowing quick travel between jobsites.
Lift Speed: Fast lifting speeds of 107 feet per minute enable two full lift/load cycles in less than a minute.
Zero Tailswing: Provides confident maneuvering in tight spaces.
Ride Quality and Stability
Load Control: Case's exclusive system provides on‑the‑go mast cushioning that lessens load shock when traveling over uneven terrain, resulting in improved material retention and a smoother ride.
Most Mast Tilt in the Industry: 45 degrees of forward tilt and 15 degrees of rear tilt.
Optional 4‑Wheel Drive: Offers improved traction in muddy or rocky conditions.
Operator Comfort and Visibility
Factory‑Built Enclosed Cab: Available with heat and air conditioning for operation in extreme temperatures.
Wide Entry Doors: On both sides, plus a roof window for visibility to overhead loads.
Intuitive Controls: Push‑button parking brake and eye‑level Advanced Instrument Cluster (AIC).
Spacious Platform: Optional deluxe suspension seat with lumbar support.
Versatility and Customization
Mast Options: A variety of mast options ranging from 11 to 22 feet, including freelift masts that allow raising forks five feet before the mast extends—ideal for low clearances.
Side Shift: Standard side shift of three inches in either direction for precise load placement.
Wide‑Channel 2‑Stage Mast: No additional rails blocking the operator's view of the forks.
Notable Older Models and Alternatives
While the H Series is Case's current focus, the company has a long history of producing all‑terrain forklifts. Older models you may encounter in the used market include:
584 Series: Including the 584C, 584D, and 584CK. A Case 584 all‑terrain forklift with 4,000 lb lift capacity and 21 ft max lifting height was recently listed at auction.
585 Series: Including the 585C, 585E, and 585G. The 585E was produced from 1993 to 2003.
586E: An older model that preceded the 586H.
686G XR: A larger model with a 6,700 lb lift capacity and 42 ft max lift height.
Note: The 588H, alongside the 586H, is the current production model. Models with "E" or "G" suffixes are older generations. The Case IH brand also produces telehandlers like the Farmlift 626, which may be confused with rough‑terrain forklifts.
Buying a Case All‑Terrain Forklift
New Purchases
For new equipment, contact an authorized Case dealer. Case offers a dealer locator on their website. You can also request a quote directly through Case's online portal.
Used Market
Used Case all‑terrain forklifts are widely available through various channels:
Platform Examples Found
Machinery Trader 584C, 585C models
BigIron Auctions Case 584 all‑terrain forklift
Machinio 586H, 586E models
IronPlanet 2018 Case 586H
Tradequip Case 580G
Typical Used Specifications (Example: 2018 Case 586H):
Lift Capacity: 6,000 lbs
Mast: 2‑stage, 117‑inch lowered mast height
Engine: FPT 4‑cylinder 55 kW 3.4L Diesel
Drive: 4x2 (2‑wheel drive)
Rental Options
Case all‑terrain forklifts are also available for rent through equipment rental companies. For example, Sunbelt Rentals offers the 586H 4WD model.
The Bottom Line
Case all‑terrain forklifts are purpose‑built workhorses for off‑road material handling. The H Series—particularly the 586H and 588H—combines rugged construction, impressive lift capacity, and operator‑friendly features. With fast road speeds, exclusive Load Control for a smooth ride, and extensive customization options, Case forklifts are a solid choice for construction crews, utility teams, and agricultural operations. The availability of new, used, and rental options makes them accessible for a wide range of budgets and operational needs. For the latest models and specifications, Case's presence at major industry events like CONEXPO 2026 suggests continued innovation in this space.